- Home
- ยป
- Our Products
- »
- Industrial Vessel
Industrial Vessel
High Pressure Tanks
Minimum Order Quantity: 1 Unit
Storage Material | Liquid/ Gas |
Material | Stainless steel as well as Carbon Steel. |
Capacity | 5000-10000 L |
Size | As per Volume Capacity Required. |
Material Grade | SS- MS |
Usage/Application | Storage |
Storage Capacity | Upto 10KL |
Max Pressure | 200-250 psi |
Orientation | Horizontal Orientation, Vertical Orientation |
Frequency | Not Applicable |
We are among the most prominent manufacturers, suppliers and exporter of high quality High Pressure Tanks in Carbon Steel, Stainless Steel & its alloy constructions. High Pressure Tanks are mostly used in Chemical Industries, Petrochemical Industries, Pneumatic Industries, etc.
Features of our range are as follows:
· Shell standard erw pipes or rolled from tested quality Stainless Steel as well as Carbon steel plates
· Dish End manufactured from tested quality Stainless Steel as well as Carbon Steel plates.
· Design pressures 5 to 15 kg / cm2 (75 to 220 psi) on shell side.
· Test pressures 21 kg / cm2 (305 psi) pneumatic on shell side.
· Inside surface of tank may be buff finish if required by client.
· Outside surface of tank can be paint with epoxy paint or pickled and passivated followed by buffing.
· Specialized construction material and / or testing producers can be used
Additional Information:
- Production Capacity: As per client Requirement.
- Delivery Time: Within 4 to 6 weeks.
- Packaging Details: As per Client Specifications.
Chemical Pressure Vessels
Minimum Order Quantity: 1 Unit
Max Design Pressure | 20-30 bar |
Capacity | 1000-10000L |
Material | Mild Steel |
Orientation | Horizontal Orientation |
Surface Finishing | Painted |
We are among the most prominent manufacturers, suppliers and exporter of high quality Chemical Pressure Vessels.
Air Vessel
Minimum Order Quantity: 1 Unit
Volume/Capacity | Upto 10000 Litres |
Storage Material | Gas |
Material Grade | SS 316-304, IS 2062 |
Gases Used | Gases |
Rust Proof | Rust Preventive Coating on inside and final painting on outside. |
Max Design Pressure | 10-15 bar |
Capacity | Upto 10000 L |
Material | Mild Steel, Stainless Steel |
Orientation | Horizontal as well as vertical |
We are among the most prominent manufacturers, suppliers and exporter of high quality Air Vessels in Carbon Steel, Stainless Steel & its alloy constructions. Air Vessels are mostly used in pneumatics applications for storage of pressurized air.
Features of our range are as follows:
· Shell standard erw pipes or rolled from tested quality CS or SS plates
· Dish End manufactured from tested quality CS or SS plates.
· Design pressures 15 kg / cm2 (220 psi) on shell side.
· Test pressures 21 kg / cm2 (305 psi) pneumatic on shell side.
· A rust preventive primer finish of epoxy zinc grey paint.
· Specialized construction material and / or testing producers can be used
Additional Information:
- Production Capacity: As per client Requirement.
- Delivery Time: Within 3 to 4 weeks.
- Packaging Details: As per client specifications.
Stainless Steel Pressure Vessel
Minimum Order Quantity: 1 Unit
Capacity | 1000-10000L |
Max Design Pressure | 30-40 bar |
Material | Stainless Steel |
Test pressures | 25 kg / cm2 on shell side (nitro test) |
Finish | Painted with epoxy zinc grey primer |
We are among the most prominent manufacturers, suppliers and exporter of high quality Stainless Steel Pressure Vessel.
Features:
- Shell : SA 240 TP 304, 316, 316Ti, 317.
- Test pressures: 25 kg / cm2 on shell side (nitro test)
- Finish: All Stainless Steel Pressure Vessels are pickled and passivated from outside.
- Accessories such as Manhole with davit arm, stair case for heighted vessel, Pressure Relief Valve, Safety Valve, Drain connection etc are provided.
Vertical Storage Tank
Usage/Application | Storage of LIquids as well as Gas |
Storage Capacity | More Than 1000 L |
Brand | MFE |
Color | White |
Material | Metal, Stainless Steel |
Wall Thickness | 5-10 mm |
Tank Orientation | Vertical as well as Horrizontal |
Surface Finishing | Color Coated |
We are among the most prominent manufacturers, suppliers and exporter of high quality Storage Tanks in Carbon Steel, Stainless Steel & its alloy constructions. Chemical Storage Tanks are mostly used in Chemical Industries, Petrochemical Industries for storage of chemicals or in process slurry.
Features of our range are as follows:
· Shell standard erw pipes or rolled from tested quality Stainless Steel plates
· Dish End manufactured from tested quality Stainless Steel plates.
· Design pressures 5 to 15 kg / cm2 (75 to 220 psi) on shell side.
· Test pressures 21 kg / cm2 (305 psi) pneumatic on shell side.
· Inside surface of tank may be buff finish if required by client.
· Outside surface of tank can be paint with epoxy paint or pickled and passivated followed by buffing.
· Specialized construction material and / or testing producers can be used
Additional Information:
- Production Capacity: As per Client Requirement.
- Delivery Time: Within 4 to 6 weeks.
- Packaging Details: As per Agreed Client Specifications.
Ammonia Receiver Vessels
Material Grade | IS 2062 |
Gases Used | Ammonia |
Storage Material | Liquid Ammonia |
Max Design Pressure | 10-15 bar |
Material | Carbon Steel, Stainless Steel |
Size | Size Varies as per volume capacity. |
Orientation | Horizontal Orientation |
Working Pressure | Between 10 to 15 bar |
Surface Finishing | Painted |
We are among the most prominent manufacturers, suppliers and exporter of high quality AmmoniaReceivers in Carbon Steel, Stainless Steel & its alloy constructions.
Features of our range are as follows:
· Shell standard erw pipes or rolled from tested quality CS or SS plates
· Dish End manufactured from tested quality CS or SS plates.
· Tubes are expanded / Welded into tubes sheets for leak proof joints
· Design pressures 15 kg / cm2 (220 psi) on shell side.
· Test pressures 21 kg / cm2 (305 psi) pneumatic on shell side.
· A rust preventive primer finish of epoxy zinc grey paint.
· Specialized construction material and / or testing producers can be used
Additional Information:
- Production Capacity: As per Client Requirement
- Delivery Time: Within 4 weeks.
- Packaging Details: As per Client Specifications.
Reactor Vessel
Material | Mild Steel |
Capacity | Up to 10000 L |
Finishing | Painted |
Orientation | Horizontal |
We are among the most prominent manufacturers, suppliers and exporter of high quality Reactor Vessel.
Receiver Vessels
Capacity | 1000-10000L |
Max Design Pressure | 15-20 bar |
Material | Mild Steel, Stainless Steel |
Vessel Dimensions | As per Volume Capacity and space available at site. |
Orientation | Horizontal, Vertical |
Surface Finish | Color Coated |
We are among the most prominent manufacturers, suppliers and exporter of high quality Receiver Vessels in Carbon Steel, Stainless Steel & its alloy constructions. Receiver Vessels are mostly used in pneumatics industries, Refrigeration industries, Cold storage, Chemical Industries, etc.
Features of our range are as follows:
· Shell standard erw pipes or rolled from tested quality CS or SS plates
· Dish End manufactured from tested quality CS or SS plates.
· Design pressures 15 kg / cm2 (220 psi) on shell side.
· Test pressures 21 kg / cm2 (305 psi) pneumatic on shell side.
· A rust preventive primer finish of epoxy zinc grey paint.
· Specialized construction material and / or testing producers can be used.
Pressure Vessel
Minimum Order Quantity: 1 Unit
Max Design Pressure | 10-15 bar, 0-10 bar, 15-20 bar, 20-30 bar |
Capacity | >10000 L |
Material | Stainless Steel |
Features | Horizontal Orientation |
With rich expertise and support of our team, we are engaged in manufacturing and supplying a comprehensive range of Pressure Vessel. We manufacture this range according to Pressure Vessel Code and ASME SEC VIII DIV using M.S. and S.S. construction with or without rubber lining / FRP lining. This range is offered up to 80 m3 capacity with operating pressure up to 30 Kg / cm2. Furthermore, to ensure that we are offering a quality assured range all the products are rigorously examined by our quality controllers team.
Process Vessels
Minimum Order Quantity: 1 Unit
Capacity | 1000-10000L |
Material | Stainless Steel |
Max Design Pressure | 30-40 bar |
Orientation | Horizontal |
Test pressures | 25 kg / cm2 on shell side (nitro test) |
We are among the most prominent manufacturers, suppliers and exporter of high quality PROCESS VESSEL.
Features:
- Shell : SA 240 TP 304, 316, 316Ti, 317, Carbon Steel.
- Dish Ends : Torrispherical/ Ellipsoidal type. M.O.C. same as shell.
- Test pressures: 25 kg / cm2 on shell side (nitro test)
- Finish: All Stainless Steel Process Vessels are pickled and passivated from outside. Carbon Steel Vessels are painted with epoxy zinc grey primer.
- Accessories such as Manhole with davit arm, stair case for heighted vessel, Pressure Relief Valve, Safety Valve, Drain connection etc are provided.
Stainless Steel Storage Tank
Storage Capacity | 5000-10000 L |
Storage Material | Water |
Tank Orientation | Horizontal |
We are among the most prominent manufacturers, suppliers and exporter of high quality Stainless Steel Storage Tank
Features:
- Shell : SA 240 TP 304, 316, 316Ti, 317.
- Test pressures: 25 kg / cm2 on shell side (nitro test)
- Finish: All Stainless Steel Pressure Vessels are pickled and passivated from outside.
- Accessories such as Manhole with davit arm, stair case for heighted vessel, Pressure Relief Valve, Safety Valve, Drain connection etc are provided.
Storage Vessels
Minimum Order Quantity: 1 Unit
Storage Capacity | Upto 50000 Litres |
Material | Carbon Steel,Stainless Steel and its alloys. |
Capacity | 1000-10000L |
Storage Material | Water, Chemicals, LIquids, Gas |
Material Grade | IS 2062, SS 316-304 |
Max Design Pressure | 30-40 bar |
Gases Used | LIquids & Gases |
Surface Finish | Two coats of Primer followed by finish paint. |
Finish | Coated |
Orientation | Vertical Orientation, Horizontal Orientation |
Surface Finishing | Painted |
We are among the most prominent manufacturers, suppliers and exporter of high quality Storage Vessels in Carbon Steel, Stainless Steel & its alloy constructions.
Features of our range are as follows:
· Shell standard erw pipes or rolled from tested quality CS or SS plates
· Dish End manufactured from tested quality CS or SS plates.
· Tubes are expanded / Welded into tubes sheets for leak proof joints
· Design pressures 15 kg / cm2 (220 psi) on shell side.
· Test pressures 21 kg / cm2 (305 psi) pneumatic on shell side.
· A rust preventive primer finish of epoxy zinc grey paint.
· Specialized construction material and / or testing producers can be used
Additional Information:
- Production Capacity: As per client Requirement.
- Delivery Time: Within 4 weeks.
- Packaging Details: As per client Specifications.